Skip to content

Trucker Path for Fleets + ISAAC Instruments

ISAAC Instruments ELD and Truck-Safe GPS

  • Connect with DOT/MC, Email, Scope, Username, Password and API Key
  • See drivers’ hours-of-service clocks in Trucker Path navigation
  • Dispatch truck-safe routes to the driver app
Connect ISAAC Instruments Account
Live driver locationLive
Last known locationUpdated 7 min ago
Six
Fields the ISAAC Instruments connect box asks for
Zero
Changes to your ISAAC Instruments setup
7 days
Free trial on Trucker Path for Fleets

Before you start

The ISAAC Instruments entry asks for six things, not a single sign-in. Two of them are simply your carrier number and your email; the rest come from the account you already hold.

Field
What it is
Where to find it
DOT/MC
Your carrier number.
The DOT or MC number your authority is issued under.
Email
The address the connection is registered to.
Your own work email. Nothing new is created.
Scope
Which data the connection is allowed to read.
Set alongside the key in ISAAC Instruments.
Username
Your sign-in name on ISAAC Instruments.
Your existing ISAAC Instruments account. No separate account is made.
Password
That account’s password.
Your existing ISAAC Instruments sign-in.
API Key
A key ISAAC Instruments issues to let another system read your data.
Generated inside ISAAC Instruments, by someone with administrator access.

How it connects

How the ISAAC Instruments Connection Works

Connect ISAAC Instruments Account
  1. 01Connect

    Connect the Trucks That Need It

    Start your Trucker Path for Fleets trial, open Connect Account in Settings and choose ISAAC Instruments. Enter the DOT/MC, Email, Scope, Username, Password and API Key listed above. Drivers and their hours of service come across on their own. Nothing is installed, and the rugged tablet and gateway is not touched.

  2. 02Plan

    Plan Around Real Hours

    Routes are built from your truck profiles and each driver’s remaining hours, read live out of the ISAAC platform rather than re-keyed from a report.

  3. 03Dispatch

    Dispatch to the Driver App

    Send the route from the dashboard to the driver app in one tap. Only the trucks you connected are affected; everything else on the account carries on untouched.

What ISAAC covers

An Integrated Cab, Left Intact

ISAAC describes its hardware as a fully integrated ecosystem combining rugged tablets, the communication gateway and the ISAAC InView camera into one managed platform, with predictive workflows guiding drivers step by step. Connecting Trucker Path does not open that up or change what the driver sees in ISAAC.

  • The ISAAC cab stays as built

    Rugged tablet, gateway and camera keep working as one managed platform. The connection reads data and writes nothing back.

  • Routing comes from the truck profile

    Height, weight, length and axle count per truck, rather than a generic map.

  • One set of clocks

    The hours a dispatcher plans against are the ones ISAAC is recording.

Driver Hours of Service
ISAAC InstrumentsSynced
6:40
Drive
8:10
Shift
1:55
Break
42:30
Cycle
Available Today 6h 40mCycle Rule 70/8
Vehicle-based routingEnabled
Vehicle data sourceELD (ISAAC Instruments)
Fuel data availableYes
248 Drivers43 AssetsLast sync: 2 min ago

Related pages

Product names and logos are trademarks of their respective owners, used here to describe compatibility.

FAQ

Does connecting Trucker Path for Fleets replace my ISAAC Instruments subscription?

No. It is an add-on, not a replacement. the ISAAC platform stays your system of record for hours of service, compliance and driver scoring. Trucker Path adds truck-safe routing and dispatch beside it.

Is the ISAAC Instruments integration free?

Connecting ISAAC Instruments costs nothing extra. Trucker Path for Fleets itself is a paid subscription and starts with a 7-day free trial, which needs a credit card to begin.

Does this add another screen in the cab?

The route lands in the Trucker Path app the driver already uses on their phone. ISAAC’s in-cab workflow is unchanged.

Does connecting change our ISAAC hardware setup?

No. ISAAC stays your system of record for hours of service and compliance.

Will drivers have to learn a second workflow?

The ISAAC in-cab workflow does not change. The route arrives in the Trucker Path app on the phone drivers already carry.

Does this touch the ISAAC InView camera?

No. The camera, the tablet and the gateway keep running as ISAAC manages them.

Who needs to be involved to connect?

Someone who can generate an API key inside ISAAC Instruments. Keys are usually restricted to administrators, so if that is not you, that is the one person to ask.

Still have questions? Our team will help you get connected.navpro@truckerpath.com

Your ELD stays

ISAAC Instruments Stays. Your Routing Gets Fixed.

Start a 7-day free trial and connect only the trucks that need truck-safe routing, leaving the rugged tablet and gateway to run everything else on the account.

Connect ISAAC Instruments Account