Trucker Path for Fleets + Samsara

Samsara ELD and Truck Safe GPS

Sync Samsara assets and drivers for compliant routing
Dispatch routes directly to Trucker Path GPS
See drivers’ hours-of-service clocks in Trucker Path navigation

Live driver locationLive

7 days: Free trial on Trucker Path for Fleets
Zero: Changes to your Samsara setup
Minutes: To authorize Samsara in Settings

Mixed fleets

Connect Only the Trucks That Need It

Samsara lists construction, food and beverage, passenger transit, field services and the public sector among the operations it runs. Most fleets on it are not only trucks — and only the trucks need routing built on height and weight.

Vans and equipment stay where they are
The assets that do not need truck-safe routing keep running in Samsara alone. Nothing about them changes.
The tractor-trailers get a route built on the rig
Height, weight, length and axle count per truck, so a bridge that clears a service van but not a 13'6" trailer is handled before the driver reaches it.
One hours-of-service source, two screens
The clocks a dispatcher plans against are the same ones Samsara is recording. Nobody is reading two numbers and guessing which is right.

Driver Hours of Service

Synced

6:40

Drive

8:10

Shift

1:55

Break

42:30

Cycle

Available Today 6h 40mCycle Rule 70/8

Vehicle-based routingEnabled

Vehicle data sourceELD (Samsara)

Fuel data availableYes

248 Drivers43 AssetsLast sync: 2 min ago

01Authorize
Authorize Samsara
Start your Trucker Path for Fleets trial, then authorize Samsara in Settings. Your drivers and their hours of service status sync over automatically, with no CSV uploads.
02Choose
Pick Which Trucks Connect
A mixed fleet does not have to bring everything across. Connect the tractor-trailers that need routing on height and weight, and leave the vans, trailers and equipment running in Samsara alone.
03Dispatch
Plan Against the Clock Samsara Is Already Keeping
The hours a dispatcher plans against are read live from Samsara, so there is one source and not two numbers to reconcile. The route then goes from the dashboard to the driver app in one tap, and position and hours-of-service status stay visible in both systems. Samsara stays the record; Trucker Path never writes back to it.

What Samsara publishes about itself

350+ integrationsTrucker Path is one more read-only connection alongside them.

100B miles of operator dataSamsara's own figure for the scale its platform runs on.

The Connected Operations PlatformTheir own description. ELD compliance is one part of it.

Living alongside what you already run

Nothing in Samsara Changes When You Connect

Hours of service logs, edits and the compliance record stay in Samsara. Trucker Path reads them and never writes back.
Cameras, coaching and driver safety scoring carry on exactly as they do now.
Samsara publishes 350+ integrations. A read-only connection does not disturb any of them.
What gets added is the route: truck-safe on each truck's height, weight, length and axle count, with toll visible before dispatch.
The route lands in the Trucker Path app your drivers already have on their phones.

FAQ

Frequently Asked Questions

Does connecting Trucker Path for Fleets replace my Samsara subscription?

No. It is an add-on, not a replacement. You keep Samsara for hours of service, compliance and driver behavior scoring, and add truck-safe routing and fuel network savings on top.

Is the Samsara integration free?

Connecting Samsara costs nothing extra. Trucker Path for Fleets itself is a paid subscription and starts with a 7-day free trial, which needs a credit card to begin.

How do I connect my Samsara account?

Two ways. Most fleets authorize Samsara directly: sign in with your existing Samsara credentials, approve the request, and drivers and vehicles start syncing. Fleets that keep integrations locked down can connect with a read-only Samsara API token created by their Samsara administrator.

Where do I get a Samsara API token?

Your Samsara administrator creates it in the Samsara dashboard. Samsara documents the steps in its developer documentation at developers.samsara.com.

Where do I see hours of service after connecting?

Inside the Trucker Path navigation screen. Drivers do not switch apps to check remaining hours.

Do I need to change anything in Samsara?

No. Your hardware, logs and driver settings stay exactly as they are.

Still have questions?navpro@truckerpath.com